Buying guide · Ad
Philips Micro X-Clean water filter jugs: UK models and buying considerations
Compare Philips Micro X-Clean jug model codes, total versus filtered capacity, Taste+ retail bundles, replacement filters and UK buying checks.
Philips Micro X-Clean UK models: read the full AWP code
A search for Philips filter jugs can show a 2.6-litre retail bundle, an older 3.0-litre specification and several cartridge names. Do not combine their strongest numbers into one imaginary model. Write down the full jug code, including letters and the suffix after the slash, before comparing an offer with a manufacturer document.
Philips UK retains information for older Micro X-Clean products, including AWP2936BLT/10 and AWP211/10, while labelling those product pages discontinued. That is useful support evidence for owners; it is not a promise that every associated retail pack is a current UK model. Availability and selected bundle contents need a separate check.
Philips 2.6L jug with three Taste+ cartridges
A Philips jug bundle labelled 2.6 litres with three Taste+ replacement cartridges; check its exact AWP model and supplied media.
- Listing capacity
- 2.6L total
- Bundle
- 3 Taste+ cartridges
Good forA jug purchase with its replacement pack identified.
Watch forConfirm full AWP code and actual filtered capacity.
Choose after confirming the UK model code, usable filtered capacity and replacement pack rather than borrowing another variant’s dimensions.
The linked Amazon example is a 2.6-litre jug with three cartridges, currently titled Taste+. Its listing also uses Micro X-Clean wording in the component description. That mixed naming is a reason to check the supplied cartridge code and exact device label before purchase, not a basis for declaring all Philips media identical.
| Example | What is documented | What not to infer |
|---|---|---|
| AWP2936BLT/10 UK support model | 3.0L total; 1.9L filtered | Not the capacity of every 2.6L retail jug |
| 2.6L Amazon three-cartridge bundle | Retail capacity label and selected pack contents | Full regional model or dimensions from another sheet |
| AWP211/10 replacement | Older Micro X-Clean three-pack | Not a replacement for every Philips water device |
| Different regional suffix or revision | Requires its own matching document | Not automatically identical to /10 UK evidence |
Filtered capacity and fridge fit are separate checks
Philips’ documented AWP2936BLT/10 has a 1.9-litre filtered reservoir within a 3.0-litre total capacity. Its listed dimensions are 260 × 110 × 255mm. These belong to that model. We do not apply them to the selected 2.6-litre bundle without a full matching code and specification.
The difference between total and filtered litres matters when filling bottles. Two 750ml bottles require 1.5 litres; a kettle fill on top may require a further cycle. Compare your serving requirement with the lower reservoir, not with the largest number in the listing title. Check the permitted fill level rather than improvising additional hopper fills.
For shelf fit, measure overall length including handle and spout, width, height and the clearance needed to remove the jug. Door lips and bottle dividers reduce usable space. Our fridge-door measuring guide provides a practical method when a listing’s “slim” description is too vague.
If the seller cannot identify the full AWP model or supply its dimensions, treat that as unresolved purchase information. A regional PDF found by a similar search term is not sufficient: revisions can differ in body shape and size even where a rounded capacity label looks the same.
Micro X-Clean, Ultra and other Philips filter names
Philips’ older jug-family instructions describe Micro X-Clean and Micro X-Clean Ultra for named AWP jug families. The model list is useful, but it does not remove the need to match the exact current cartridge pack and device suffix. An electronic dispenser or bottle is not covered merely because its title contains Philips.
Philips AWP211/10 Micro X-Clean, three-pack
A three-pack of the older Micro X-Clean replacement family; Philips UK retains support information and labels AWP211/10 discontinued.
- Code
- AWP211/10
- Pack
- 3 Micro X-Clean
Good forA documented compatible older Philips jug.
Watch forUK support page labels this older code discontinued.
Useful for a documented compatible older jug if the exact selected pack is available; check suffix, seal and instructions before opening.
AWP211/10 is a documented older Micro X-Clean replacement example. The UK page’s discontinued status means owners should verify the selected retail pack rather than assuming its future supply. Confirm quantity, factory seal, instructions and exact fit before opening a large multipack.
Philips also lists other replacement families, including softening-focused jug media, tap filters and GoZero bottle filters. Their purpose and connections differ. Read our Philips cartridge compatibility guide before treating a replacement with a familiar brand name as the right part.
For a hard-water purchase, look for an explicit limescale or hardness-reduction purpose on the correct cartridge. Do not interpret “fast flow” or a timer as evidence of a particular contaminant reduction. Neither a normal taste nor a low TDS number verifies every performance claim.
Use and care: keep the manual with the jug
Philips’ jug-family manual is for potable municipal tap water, with temperature conditions for filtration. It is not a treatment instruction for an unknown or microbiologically unsafe supply. Use the procedure for the supplied cartridge, including preparation and any discarded first fills, instead of borrowing a routine from BRITA or BWT.
The manual instructs users not to pour while unfiltered water remains in the upper hopper. Build that waiting step into your serving routine. A fast-flow description does not mean a jug can be tilted at every point in the filtration cycle without risk of untreated water mixing into a pour.
Separate the care of the body, lid, indicator and filter. Keep electronic components out of washing methods the manual does not allow. A timer reminds you to change media; it does not directly measure all reductions. Reset it when fitting a replacement according to the correct model’s instructions.
Keep filtered water cool and use the storage guidance for the product. The cited Philips manual advises refrigerated storage and consumption within 24 hours. That instruction should not be interpreted as permission to leave a jug warm for the same period. A gravity jug itself does not actively chill water.
Compare bundle value and the next replacement purchase
A starter bundle can be useful when it includes the precise cartridge you intend to keep buying. Compare the vessel, included cartridge count and delivered price as one purchase. Then calculate the next pack’s unit cost separately; an attractive initial deal does not establish the annual cost.
For the older Micro X-Clean route, use its one-month replacement instruction and any volume or earlier conditions stated on the exact pack. Do not apply a different Taste+ pack’s litre rating to every old AWP211 cartridge. Use our running-cost calculator only with limits that actually belong to the selected filter.
Choose a Philips jug when the model, storage fit and replacement route are clear. If those details remain uncertain, compare a documented alternative through the jug and dispenser hub rather than buying on a mixed-name title alone. Clear identification is more useful than an unsupported claim that one entire brand is best.
Common questions
Is every Philips jug labelled 2.6 litres the same model?
No. The full AWP code, regional suffix, revision and bundle contents matter. A capacity label alone does not establish dimensions or cartridge specification.
What is the capacity of AWP2936BLT/10?
Philips’ UK specification gives 3.0 litres total and 1.9 litres filtered. Keep this older documented model separate from other retail bundles.
Are Taste+ and Micro X-Clean automatically identical?
Do not assume that from a retail title. Match the supplied cartridge code and current pack instructions; listing names and supported product revisions can differ.
Is Philips AWP211/10 still a current product?
Philips UK labels AWP211/10 discontinued while retaining support information. A retail offer may still exist, so verify the exact pack and availability rather than assuming a continuing range.
Does a Philips filter jug replace an electric dispenser cartridge?
Not automatically. Instant-flow, bottle, tap-mounted and gravity-jug filters have distinct model requirements. Use the exact device’s supported replacement.